The best way to start with troubleshooting DSL internet problems is understanding what those light indicators mean. You need to know what the lights are supposed to look like and what they’re telling you if they look different.
What your lights should look like
When your modem and Internet service are working correctly, the lights on your modem look like this:
- Power light — solid green
- DSL light — solid green
- Internet light — solid or blinking green
- Ethernet light — blinking green, if you’re connected by an Ethernet cable
- Wireless light — blinking green, if you’re using wireless
What it means if your lights look different
Your modem lights tell you a lot about your modem. Fortunately, there are only 5 lights that you need to care about. Depending what’s going on, they’ll be solid, slow blinking, fast blinking, green, amber (yellowish-orange), red or not lit up.
Of course, this is a particularly important light. It tells you power is getting to your modem. It should be solid green. If it’s amber (yellowish-orange), flashing, red or not lit up at all, your modem needs attention. There could be a problem with the wall outlet, power cord or the modem itself.
DSL (or LINE) light
The DSL light lets you know your modem has located the CenturyLink network.
If you’ve recently unplugged your modem, turned it OFF and/or lost power to your home, your modem will need to re-establish a connection to our network. The DSL light shows you that it’s doing this by first blinking slowly and then blinking faster. When it fully re-establishes the connection, it turns solid green.
If the modem does not find the CenturyLink network, the DSL light will turn RED. This can be caused by bad wiring or the modem being plugged into the wrong jack.
INTERNET (INT) light
This light lets you know your modem has found the Internet. It should be green, either solid or flickering.
If it’s amber (yellowish-orange), red or not lit up at all, it may need attention. You may have lost connection due to a power outage, or other circumstance. Your modem could be running through its activation sequence and/or be in the process of rebooting itself. For the most part, these scenarios are temporary and should resolve on their own. However, if they don’t, there are things you can do.
This light only comes on when you plug an Ethernet cable into the back of your modem and connect a computer (or other device). In that case, the light will be solid green (ready) or flickering green (transmitting data). If it isn’t, there’s no connection between your modem and computer.
When your modem’s wireless is ON and working, this light blinks green. If it’s only green (and not blinking), it means your wireless is ON but not sending data. If it’s not lit up at all, your wireless is OFF.